View R5F51115AXFK_7605164.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r20ut 2 919 ej0100 rev1.00 p age 1 of 10 feb . 21, 201 4 a ppli cation le ading t ool for rx v1.0 1 .00 release note contents chapter 1. introduction .............................................................................................................................. 2 chapter 2. target devices ........................................................................................................................ 3 chapter 3. operating environment ............................................................................................................ 4 chapter 4. changes .................................................................................................................................. 5 4.1 details of ch anges ................................................................................................................... 6 4.1.1 change of data handled by polling ......................................................................................... 6 4.1.2 change of clock generator setting ......................................................................................... 6 4.1.3 addition of pinview .................................................................................................................. 6 chapter 5. cautions ................................................................................................................................... 9 5.1 cautions list ............................................................................................................................. 9 5.2 cautions details ..................................................................................................................... 10 5.2.1 cautions of usb ..................................................................................................................... 10 5.2.2 about online help ................................................................................................................... 10 5.2.3 about the iar embedded workbench ................................................................................... 10 5.2.4 cautions of serial communications interface asynchronous mode ...................................... 10 5.2.5 cautions of low power consumption .................................................................................... 10 r20ut 2 919 ej0100 rev.1.00 feb . 21 , 201 4
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 2 of 10 feb . 21, 201 4 chapter 1. introduction application leading tool(applilet) for rx is a software tool to generate device driver code for on - chip peripherals. it generates device driver codes using user settings through gui. initialize code and api functions are provided.
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 3 of 10 feb . 21, 201 4 chapter 2. target dev ice s below is a list of devices supported by the applilet for rx v1 .0 1 .0 0 rx111 group pin device name 36pin r5f5111ja x lm, r5f51111a x lm, r5f51113a x lm 40pin r5f5111jaxnf, r5f51111axnf, r5f51113axnf 48pin r5f5111jaxfl, r5f5111j a xne , r5f51111axfl, r5f51111axne r5f51113axfl, r5f51113axne , r5f51114axfl ,r5f51114axne r5f5111 5 axfl ,r5f51114 5 xne 64pin r5f5111jaxfk, r5f5111jaxfm, r5 f5111ja x lf r5f51111axfk, r5f51111axfm, r5f51111a x lf r5f51113axfk, r5f51113axfm, r5f51113a x lf r5f51114axfk, r5f51114axfm, r5f51114a x lf R5F51115AXFK, r5f51115axfm, r5f51115a x lf f ollowing documents. manual name document number rx111 group user's manual: ha rdware r 01uh0365jj0110 r 01uh0365ej0110 rx110 group pin device name 36pin r5f5110h ax lm, r5f511 0 ja x lm, r5f511 01ax lm, r5f511 03ax lm 40pin r5f5110h a xnf , r5f511 0 ja xnf , r5f511 01 a xnf , r5f511 03a xnf 48 pin r5f511 0 jaxfl, r5f511 0 j a xne , r5f511 0 1axfl, r5f511 0 1ax ne r5f511 0 3axfl, r5f511 0 3axne , r5f511 0 4axfl ,r5f511 0 4axne r5f511 05 axfl ,r5f511 05 axne 64 pin r5f511 0 jaxfk, r5f511 0 jaxfm, r5f511 0 ja x lf r5f511 0 1axfk, r5f511 0 1axfm, r5f511 0 1a x lf r5f511 0 3axfk, r5f511 0 3axfm, r5f511 0 3a x lf r5f511 0 4axfk, r5f511 0 4axfm, r5f511 0 4a x lf r5f511 0 5axfk, r5f511 0 5axfm, r5f511 0 5a x lf f ollowing documents. manual name document number rx11 0 group user's manual: hardware r 01uh0421jj0100 r 01uh0421ej0100
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 4 of 10 feb . 21, 201 4 chapter 3. operating environment ? host machine ? ibm pc/at compatibles ( windows? 8, windows? 7, windo ws vista?) ? processor: 1 ghz or higher (must support hyper - threading, multi - core cpus) ? memory capacity: 2 gb or more recommended. minimum requirement is 1 gb or more (64 - bit windows requires 2 g or more) ? hard disk capacity: 200 mb or more spare capacity ? dis play: 1024 x 768 or higher resolution, 65,536 or more colors ? interface: usb 2.0 ? all other necessary software environments in addition to windowsos ? .net framework version4.0 ? microsoft visual c++ 20 10 sp1 runtime library ? development environments product n ame version iar embedded workbench for renesas rx v2.4 2 .2 or later gnur x v12.0 3 or later
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 5 of 10 feb . 21, 201 4 chapter 4. changes this chapter describes change from applilet for rx v1 .0 0 .00 to v 1 .0 1 .00 no. description version r x111 rx110 v 1.0 2 .00.0 4 v 1.0 2 .00.0 4 1 change of data handled by polling - - 2 change of clock generator setting - - 3 addition of pinview : correspondence, - : not correspondence ( finish of correction ), / : outside of function
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 6 of 10 feb . 21, 201 4 4.1 details of changes 4.1.1 change of data handled by polling the selection "data handled by polling" was eliminated. - data processing settings for the serial communication interface (sci) - data processing settings for the serial peripheral interface this issue has been corrected in v1.0 1 .0 0 4.1.2 change of clock generator setting in the clock generator setting, it corrected so that the value exceeding restriction of a device could not be set up. this issue has been corrected in v1.0 1 .0 0 4.1.3 addition of pinview pinview displays current pin settings by c odegenerator . there are device top view and device list view. this issue has been corrected in v1.0 1 .0 0 rotate devi ce top view supports rotate function. it allows user to rotate the device top view either in clockwise or anti - clockwise direction in steps of 90 degree.
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 7 of 10 feb . 21, 201 4 zoom device top view supports zoom function. the zoom slider controls the zoom level. drag and move device top view supports mouse drags action. hold down mouse left button on the graph and move will drag the graph around. highlight pins by peripheral device top view will highlight the group of pins that belongs to the active cg peripheral (macro) . input / output (i/o) direction display device top view supports i/o direction of each pin. input/output direction is indicated by an arrow. pin label color highlight when pin label is displayed in blue color and indicated with parenthesis, it re fers to pin function is configured in c odegenerator . device top view output file click on the ?save device top view? button on device top view toolbar, the device top view is saved as an image file, in png format. configure pinview color in property window pinview supports for user to change color, through the property window. right click on the device top view on project tree, the property window will pop up a right click menu. device list view device list view displays the pin information in a dat a grid format. it has two data lists: ?pin number? and ?macro?. both lists refer to the same pin configuration as shown on the device top view.
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 8 of 10 feb . 21, 201 4 pin number list window pin number list displays current pins configuration pin number. macro list window macro? list displays the information and grouped by each peripheral.
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 9 of 10 feb . 21, 201 4 chapter 5. cautions this section describes cautions for using a pplilet for rx . 5.1 cautions list no description version r x111 r x110 v 1.0 2 .00.0 4 v 1.0 2 .00.0 4 1 cautions of usb. / 2 cautions of online help 3 cautions of the iar embedded workbench for renesas rx v2.4 2.1 4 cautions of serial communications interface asynchronous mode 5 cautions of low power consumption : correspondence, - : not correspondence ( finish of correction ), / : outside of function
a ppli cation le ading t ool for rx v1.0 1 .00 release note r20ut 2 919 ej0100 rev1.00 p age 10 of 10 feb . 21, 201 4 5.2 cautions details 5.2.1 cautions of usb a pplilet for rx is not supporting the usb. [workaround] there is no workaround . 5.2.2 about onli ne help a pplilet for rx is not supporting online help. [workaround] there is no workaround . 5.2.3 about the iar embedded workbench in case of iar embedded workbench for renesas rx v2.42. 1, the following functions cause build error. ? setting of high - speed on - chi p oscillator ? setting of i/o port (porth and portj) [workaround] setting of high - speed on - chip oscillator comment out generated line system.hocowtcr.byte = xxxx; in a function void r_cgc_create(void) example void r_cgc_create(void) { /* set hoco wait time */ system.hocowtcr.byte = _06_cgc_hoco_wait_cycle_266; // this line setting of i/o port (porth and portj) there is no workaround . please use the iar embedded workbench for renesa s rx v2.4 2 . 2 or later. 5.2.4 cautions of serial communications interface asynchronous mode a pplilet is a synchronization mo de of sci and is not supporting the mtu clock input . [workaround] there is no workaround . 5.2.5 cautions of low power consumption applilet for rx is not supporting low power consumption . [workaround] there is no workaround .
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesas electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-owned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-651-700, fax: +44-1628-651-804 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao rd., putuo district, shanghai, china tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2013 renesas electronics corporation. all rights reserved. colophon 3.0 ? 201 4 renesas electronics corporation a nd renesas solutions corp . colophon 3.0

▲Up To Search▲

Price & Availability of R5F51115AXFK

	To Download R5F51115AXFK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .